1. The cooling system should use clean soft water

The pH value of the cooling water should be controlled within the range of 8-11 to minimize fouling and blockage in the cooling system, in order to prevent affecting the cooling effect. During use, it is necessary to regularly clean the cooling system with chemical agents to ensure good cooling circulation and normal heat dissipation.

2. After starting the diesel generator, it should be operated with medium and low throttle first

The machine can only start when the water temperature reaches 40 ℃ or above, and can only work with load when it reaches 60 ℃; Reduce long-term overload operation of diesel generators.

3. When the Weifang generator overheats due to water shortage, cold water should not be added again.

Let the diesel generator run at low speed first, and then add it after the water temperature drops; When temporary parking is required, the diesel generator can be run at idle speed with a small throttle, but the time should not be too long.

4. In the cold season, in order to facilitate the start-up of Weifang generators, hot water at around 80 ℃ can be added to the cooling system.

Or heat up the lubricating oil in the oil pan before starting. After the work is completed and the temperature of the diesel generator drops to 50-60 ℃, open the drain valves of the radiator and cylinder block to drain the water in the cooling system.

5. Regularly check whether the water tank is short of water or leaking, and whether the fan tape is too loose; The thermostat cannot be dismantled arbitrarily; During work, the opening of the windshield and blinds of the water tank should be adjusted according to the working temperature of the diesel generator.

What are the precautions for using Weifang generator water tank? Huaquan Power has made an introduction, hoping that the above introduction can provide reference for users.